Sundaram Clayton Ltd (BUY AT CMP 163.00)
An Introduction
The Sundaram-Clayton ltd is a part of multi crore TVS group. It is a jointpartnership between TVS and Clayton Dewandre of Germany. Even though the partnership has been dissolved the group retains the old name. It is located at Padi and hands a Sprawling facility. It is a parts supplier to many prestigious auto companies like(VOLVO,HYUNDAI,FORD,TVS etc)The pressure die casting machine here is the largest in India about 3200tonnes.The two divisions regarding which Mr.Shivakumar enlightened us were DIE CASTING UNIT
1.Gravity Die Casting
2.Pressure Die Casting
1.Gravity Die Casting
2.Pressure Die Casting
They provided the protective eye glass for all our students. the first we saw isthe gravity die casting unit. The raw materials used in the die casting process are aluminium and aluminium alloys. They are fresh aluminium bar which is known as- INGOT and also recyclable aluminium. They melt the aluminium above600 degree Celsius in a RBT furnace. After melting the molten metal is taken by a tilt type ladler which is for transferring the material. It is taken to the holding furnace with pyrometric temperature control and molten metal is poured in the gravity die casting machine and they get the required shape. The melting capacity per year is 32000tonnes.
The pressure die casting unit at the company was very impressive. It injects the molten metal is poured into the provision made and then a hydraulic piston injects the metal at very high pressure into the mould. Pick and place robots then remove the partfrom the mould and is manually cooled by the operator using a water sprayIn the machining division consists of four CNC machines for ,machining
thecomponents (MAKINO,CHIRON,HARDINGE,DECKELetc)They have the leak testingmachine to check the leak in the components which has been die casted. .And also they have endoscope testing using camera the wire is sent inside the component that may be viewed in the monitor and they check and if any damage it may be rejected.(eg:Around 3or 4 components are rejected from 5000 components in average)
The components which were moulded here are ladder frame, combibraket,1.4 oil pan assy, rocam oil pan assy, case trans axle assy, rod shift, UH oil panassy, holder comp lost motion assy, diesel case transmission, clutch housing etc.
BUY FOR LONG TERM (AT LEAST NEXT 6 MONTHS) U MAY GET DECENT RETURN
(STOCK IS A 5.RS. F.V)
No comments:
Post a Comment